4PCS Rigid PETG Tube 50mm (2") OD x 2mm Wall Thickness, 16.5" Length PC Rigid Round Clear Tubing Unbreakable Polycarbonate Tubing Chemical Resistant Clear Tube

Nice, as described. To make what I need I had to saw one to add to the other. It cut with no cracks or breaks. I then took a piece of the extra and while cutting it lengthwise, it slipped and flew into a few things with some heavy impact. Still intact. I stretched it a bit open from the cut and slipped it onto the large pieces and it holds them together pretty darn well and I didn't get to glue it yet. This stuff is nearly unbreakable.

I ordered the 1/2" and 1" pack of these. They're exactly what I wanted. However, I ended up with the wrong size of end caps for the 1/2" size when I ordered using the "12mm OD" information. The outer diameter is more like 14mm. I should have paid closer attention to the pictures, I guess. It all makes sense if you say 12mm is the inner diameter, plus 2 mm for each side of the tube wall. The 1" size is exactly 25mm. Still waiting to see if the end caps I ordered fit those. I'm keeping them, but I thought this info might help anyone needing to have end caps!

Needed these for a custom project. They come packaged wrapped for protection and are exactly as they are described. Nice and durable I even had a car accidentally run one over and it was sturdy enough to cobble back together. Good buy.

Looks very good, no streaks, or bobbles. Probably not Chinese made!

So these ARE actually 1" and 1/2". The problem is PVC pipes in the US aren't actually the measurements they say they are. Thus, these won't fit into normal PVC pipes. With that said, these are clear and sturdy. I added 4 to 5 wraps of electrical tape to the ends of the 1/2" ones and they were able to snugly fit into traditional 3/4" PVC fittings.

My favorite product to work with. Cuts great on saw but must use the right blade for acrylic.

If your gonna use this for science and heat it up it will shatter for the size that it is it should be thicker to handle it’s size , very brittle this item was made not to last but to break , it was cheap so I got what I paid for .

I needed a solution to put my grandmother’s china in my cabinet but was concerned about the weight on the glass shelves as there are only small pegs on the sides and back to support them. This turned out to be a great solution with a little modification. I cut them to the length needed with an electric chop saw. Go slow and you’ll get a nice cut. It will end up tearing/jagged if you go fast. Also watch out for flying off-cuts. I dusted them off and lightly sanded some rough edges. I also purchased silicone bumpers to put on each end (sticky back) and had factored that height into my initial cut measurement. They installed quickly. I lined them up on top of each other to support the weight, and have held up great, even with a heavy glass pumpkin on the top shelf for the fall months.

Funcionaron perfecto para lo que los necesitaba.

Justo como en la descripción, llego rápido. La verdad es que yo compre estos tubos de policarbonato para hacer un proyecto de un sale laser y creo que quedaros bastante bien :).

muy feliz por la compra, llegaron a tiempo, bien empacados, llegaron en buen estado, el producto es igual como la descripción y las fotos, yo lo use para un pastel y super lucieron,