Boao 4 Pieces 8 Inch Adjustable 304 Stainless Steel Duct Clamps Worm Gear Hose Clamp for Pipe, Intercooler, Plumbing, Tube and Fuel Line

Needed replacements for my 1995 corvette. Fit well and seems sturdy.

I got what I ordered

Got this to attach a 10', 1-1/4" diameter round aluminum pole to a 4" square fence pole. Needed to mount a weather station on top of the round pole 10' off the ground. Bought a new weather station and wanted to mount it as high as possible. Didn't want to dig a hole, pour concrete, to mount the pole so I decided to use the post on my existing backyard fence to hold the pole. The fence has a 4" diameter square post. I put the pole next to the fence post and used 4 of these clamps to hold it tight. This held the pole tight to the fence post and allowed me to mount my weather station up 10' The 8" clamps were long, so I cut about 3-4" off of them and put them around both the fence post and aluminum pole. Took a while to turn the adjusting mechanism tight. At the same point on every full turn, it got difficult to tighten, I had to use extra force each time to get past this point. Other than that, it worked well. Appears to be very tight but don't know why it couldn't have worked smoother.

Clamps work perfectly.

I use these clamps to clamp together segmented bowl parts. They are cheap, so I didn't expect too much. I got what I expected. The turn screw heads are 1/4 inch and fit tightly against the band making it very difficult to get a socket on them. Most of the ones I've bought at the local auto shop have 5/16 screw heads and are raised enough above the band to allow a socket to fit. The screw housings are thinner than normal and make it easy to over tighten and break and harder to remove because the screw itself, releases from the housing and unscrews completely. They are ok for a one time application.

Just great by wrapping my six inch ducting easily with the fasteners.

Seem to be well made, like a worm clamp should be, but the 8 in. clamps will NOT fit around an 8 inch duct, pipe, etc. Stretched out, the clamp is EXACTLY 8 inches long and will not thread together and clamp down. If you want an 8 inch, order a 10 inch!

Good value. Worked as described. Would purchase again.

Needed for fixing a bracket to a pole, ideal good and strong and wont rust

worked excellently on chimney flue

Good product

Fabricadas en acero inoxidable. Muy fáciles de colocar y aprietan y aseguran bien los tubos.

Ordered once Description says 8 inch , actually they are 12 inch. Returned the 12 inch ordered 8 inch again. Same thing 12 inch. Interesting that description says 8 inch and so does labelling on packaging but it is 12 inch? Must he mfg labelling and packaging error.